Showing results: 31 - 45 of 54 items found.
-
GRL-PCIE4-BASE-RXA -
Granite River Labs Inc.
GRL’s PCI Express®4.0 Base Specification Receiver Calibration and Test Automation Software for the Anritsu MP1800A BERT (GRL-PCIE4-BASE-RXA) provides an automated, simple, and efficient way to test your PCIe 4.0 Receiver to the Base (ASIC) Specification. GRL-PCIE4-BASE-RXA automates the MP1800A and Keysight real-time oscilloscope to calibrate the stressed eye opening and test Rx conformance.
-
PAM-4 BERT -
Munich-Instruments GmbH
The MI-PE5610-1 is a PAM-4 BERT with an integrated propriety, optical PAM-4 modulator. ROSA testing is tremebous simpliefied by the integration of the optical PAM-4 modulator in the BERT chassis. This ROSA testing solution saves time and avoids trouble shooting and accelerates your product development. The BERT provides an excellent optical PAM-4 reference output signal with adjustable OMA of the three PAM-4 eyes.The implemented 3-Eye BER technique measures the BER in real time of the 3 eyes simultanously.A wide range of selectable pattern for compliance test and signal analysis is supported.
-
BE9000 Series -
Berry Test Sets
The BE9000 is a portable AC powered test set for use at almost any point in a circuit on the customer premises location (PBX or station equipment) to the Central Office. The BE9000 is able to accommodate a wide range of circuit types such as: DS1, DS0, DDS and all 2Wire or 4 Wire analog Special Circuits. Maintenance and installation of these circuits requires a combination of these functions: DS1 performance monitoring, DS1 BERT, DS0 BERT, Drop & Insert, Transmission, Signaling, Ringing, Addressing and Supervision in one test set to achieve maximum technician efficiency. Additionally, the set can be programmed in the field so that repetitive tests can be stored and recalled for future use.
-
GL Communications Inc.
GL’s PacketExpert™ 10G provides comprehensive testing of 10 Gbps wirespeed Ethernet/IP networks. It has two 10 Gbps Optical ports, and two 10/100/1000 Mbps Electrical/Optical ports capable of BERT, Smart Loopback, RFC 2544, ExpertSAM, Record and Playback, IPLinkSim™ and PacketBroker functionalities.
-
GEM-Lightning -
EDI Enterprises
GEM-Lightning is a low-cost, handheld device for monitoring and testing (BERT) of T1 and E1 interfaces present in telecom central offices and test labs. GEM-Lightning is an essential tool for switch technicians and customer service personnel attempting to identify problematic circuits in the field. The portability GEM-Lightning makes it a must for the technician on the move while its remote logging capability allows the capture of information for later analysis.
-
ML4079D -
multiLane
The ML4079D is a fully featured 400G BERT that can be configured as an 8-channel PAM4 30 GBaud or 8-channel NRZ 30 Gbps lanes. The receivers support FEC decoding (802.3bj KR4/scaled KP4) and will return the frame loss ratio for FEC scenarios and BER for unframed data. The receivers also show the eye’s Histogram and the channel’s SNR over time. The transmitters Support all standard test patterns mandated by IEEE and OIF such as PRBSQ13, SSPRQ, PRBSQ31, QPRBS13CEI, etc… The user may also program the TX to output a user-defined pattern up to 32 kb long. The transmit power is adequate for testing up to 10 Km SMF links.
-
ML4039E -
multiLane
The ML4039E is a fully featured 400G BERT that can be configured as a 4-channel PAM4 53 GBaud or 4-channel NRZ 28/53 Gbps lanes. Also half rates of 26GBd are supported in PAM mode. The transmitters Support all standard test patterns mandated by IEEE and OIF such as PRBS13Q, SSPRQ, PRBS31Q, etc… The user may also program the TX to output a user-defined pattern up to 131 kb long. The transmit power is adequate for testing up to 10 Km SMF links.
-
ML4039-JIT-BTP -
multiLane
The ML4039-JIT series is a state of the art 4 Lane Pulse Pattern Generator and Error Detector with Jitter Generator & Equalizer up to 30 Gbps. It is fully featured for lab and production testing of systems, components, and Electro-Optical Modules. It has low intrinsic jitter – typically 330 fs – and features built-in jitter and interference modulators specifically designed to enable easy CAUI4 compliance testing.
-
ML4039EN -
multiLane
The ML4039EN is a fully featured 400G BERT that can be configured as a 4-channel PAM4 56 GBaud or 4-channel NRZ 28/56 Gbps lanes. Also half rates of 23 to 29 GBd are supported.
-
-
RB1204-HDMI/DP -
Raybit Systems, Inc.
*Low cost continuous 4ch, 1G to 12Gb/s Bit Error Ratio Tester (BERT) and Eye Checker
-
RB3004 -
Raybit Systems, Inc.
*Low cost continuous 4ch, 1G to 30Gb/s Bit Error Ratio Tester (BERT) and Eye Checker
-
RB1204-HDMI,RB1204-DP -
Fluke Process Instruments
*Low cost continuous 4ch 1G to 12Gb/s Bit Error Ratio Tester (BERT) and Eye Checker
-
OptoBERT™ -
Optellent, Inc.
The OptoBERT family of BERTs offers the best value in the industry for bit-error-ratio testing of optical and electrical components, subsystems and systems. OptoBERT family of products covers data rates from 100 Mb/s to 28.05 Gb/s.
-
Keysight Technologies
Customize your BERT with additional features and functions. Our selection of software, accessories, and services ensures you get the most out of your instrument. These are available for purchase with the equipment or anytime thereafter. With Keysight, you'll always have the latest capabilities.